We developed this unique drill bit to create a curved hole from just below carpet line up into the center of the floor plate in the wall cavity. Avoid the messy and time consuming alternative of removing the base board and chiseling out a path through the wall and the wood floor plate. This tool provides a clean, professional installation when you need to route wire or cable from the floor level up into the wall. Great for slab construction, concrete floors or under-carpet wire applications. The unique function of this tool is a product of our innovative, patented design there is nothing else like it! The study powder coated steel frame directs the specialized cable shaft paddle bit up along an arc into the wall cavity so that you prevent drilling through the opposite wall surface. /n The Base-Boar-Zit is now available in two sizes: the standard 5/16” size and the larger 7/16” size to accommodate coax. Each size is shipped as a kit that includes the cable bit with frame, a 10ft. thin fish wire in storage case (to fish your wire or cable through the curved hole) and hex wrench.
These 3/16" Fibersnakes are a simple wire pulling tool for short wire runs*. Designed with a reinforced fiberglass core and then coated with plastic to provide superior flexibility and long lasting durability. Each end has a zinc plated tip so they won't rust and you can pull from either direction. Comes housed in it own PVC case. Available in 10', 25', and 40' lengths.