Lighting Control, PLC Modules

  • 23A00-2 HAI Flush Mount Remote Indoor Temperature Sensor
  • 23A00-2 HAI Flush Mount Remote Indoor Temperature Sensor

  • SKU: 23A00-2
  • Product #: 57119
  • The Model 23A00-2 is a flush mount temperature sensor that can be installed on an Omnistat2 thermostat to monitor the temperature of a remote location, can be combined with the onboard temperature sensor for the average temperature of two locations, or can be used to monitor the outdoor temperature for dual fuel heat pump installations.
  • Sale price: $91.86

  • 31A00-7 HAI Extended Range Indoor/Outdoor Temperature Sensor
  • 31A00-7 HAI Extended Range Indoor/Outdoor Temperature Sensor

  • SKU: 31A00-7
  • Product #: 57125
  • The Model 31A00-7 Extended Range Temperature Sensor is used for sensing temperatures from -40° F - 120° F. When connected to an HAI Home Control System with Firmware Version 2.8 or higher. It features a new, high accuracy temperature sensor. The temperature can be used to activate programs for controlling temperatures indoors and in attics, garages, greenhouses, basements, wine cellars, coolers, and freezers. The temperature can be displayed on the console or touchscreen, or spoken over the telephone. It can also report, log, alert, or generate an alarm if the temperature reaches freeze conditions or if the temperature goes above the high setpoint or drops below the low setpoint programmed in the system. When used outdoors, the Model 31A00-7 should be mounted under an overhang to protect it from direct sunlight and rain. It is coated with a sealant to withstand outdoor moisture. The outdoor temperature can be displayed on a console or touchscreen, spoken over the telephone, or displayed on an HAI communicating thermostat. Automation programs, macros, and indoor appliances can be controlled based on the outdoor temperature.
  • Sale price: $104.97

  • 39A00-1 HAI HLC Phase Coupler
  • 39A00-1 HAI HLC Phase Coupler

  • SKU: 39A00-1
  • Product #: 57143
  • HAI 39A00-1 Phase Coupler (Standalone, Omni family or Lumina family home control systems). A Phase Coupler for 120/240V electrical systems increases the reliability of your HLC system. HAI recommends the use of this part in every HLC installation.
  • Sale price: $134.49

  • 36A00-1 HAI PIM & Cable - Minimum Order 12 Units
  • 36A00-1 HAI PIM & Cable - Minimum Order 12 Units

  • SKU: 36A00-1
  • Product #: 57138
  • A Powerline Interface Module (PIM) UPB will connect your lighting system to an UPB compatible home control system or to a computer, which can then control your UPB lights. It comes with a cable for connecting the PIM to a serial port on an HAI Lumina, Lumina Pro, Omni LT, Omni II, Omni IIe, or OmniPro II home control system. If your Omni LT home control system is using all of its serial ports, HAI offers the HLC Expansion Kit for Omni LT (HAI Part Number 36A10-1) to add another serial port for the PIM to use.
  • Sale price: $167.30

  • 364355-03 ALC 4-Button Scene Switch, Almond
  • 364355-03 ALC 4-Button Scene Switch, Almond

  • SKU: 364355-03
  • Product #: 57178
  • Connects to a controller to provide program control of lights, lighting scenes, house modes or devices such as motorized blinds, fans, garage doors, etc. Does not directly control a 120VAC load.
  • Sale price: $187.57

  • 10A06-1 HAI 16-Zone Hardwire Expander
  • 10A06-1 HAI 16-Zone Hardwire Expander

  • SKU: 10A06-1
  • Product #: 57104
  • This module adds 16 fully configurable input zones to an Omni, Omni II, OmniPro, or OmniPro II automation controller system. The module comes with mounting hardware and cable to attach to the controller. Terminals are provided for 16 additional zones that can be programmed for burglary, fire, temperature or auxiliary inputs. Up to 2 modules can be installed on the Omni II and OmniPro II for an additional 32 zone inputs.
  • Sale price: $196.82

  • 35A00-3 HAI 600 Watt Non-Dimming Switch
  • 35A00-3 HAI 600 Watt Non-Dimming Switch

  • SKU: 35A00-3
  • Product #: 57135
  • The 600 Watt UPB Non-Dimming Switch is used for controlling loads up to 600 Watts. It comes with a default white paddle, connectors, and instructions. Switch Color Change Kits (HAI Part Number 35A14-color code) are available in White (WH), Almond (AL), Black (BL), Ivory (IV), Brown (BR), and Grey (GR) colors.
  • Sale price: $196.82

  • 31A00-2 HAI Indoor/Outdoor Temperature and Humidity Sensor
  • 31A00-2 HAI Indoor/Outdoor Temperature and Humidity Sensor

  • SKU: 31A00-2
  • Product #: 57123
  • The Model 31A00-2 Indoor/Outdoor Temperature Sensor is used for sensing outdoor or indoor temperature. It is coated with a sealant to withstand outdoor moisture and features a new, high accuracy temperature sensor that doesn’t need calibration.
  • Sale price: $203.37

  • 31A00-8 HAI Extended Range Indoor/Outdoor Temperature & Humidity Sensor
  • 31A00-8 HAI Extended Range Indoor/Outdoor Temperature & Humidity Sensor

  • SKU: 31A00-8
  • Product #: 57128
  • The Model 31A00-8 Extended Range Temperature and Humidity Sensor is used for sensing temperatures from -40º F - 120º F. When connected to an HAI Home Control System with Firmware Version 2.8 or higher. It can also be used for reporting the relative humidity from 0 to 100 percent. The Model 31A00-8 features a new, high accuracy temperature sensor. The temperature can be used to activate programs for controlling temperatures in attics, garages, greenhouses, basements, wine cellars, coolers, and freezers. The temperature can be displayed on the console or touchscreen, or spoken over the telephone. It can also report, log, alert, or generate an alarm if the temperature reaches freeze conditions or if the temperature goes above the high setpoint or drops below the low setpoint programmed in the system. High and low humidity limits can be set for taking action (i.e. turning on the bathroom vent fan, running a/c in de-humidification mode, turning on humidifier in heating mode, etc.) or reporting high or low humidity conditions in homes, greenhouses, wine cellars, coolers, humidors, etc. Controlling humidity is particularly helpful in combating the growth of mold in vulnerable areas of the home, such as bathrooms, basements, attics, etc. When used outdoors, the Model 31A00-8 should be mounted under an overhang to protect it from direct sunlight and rain. It is coated with a sealant to withstand outdoor moisture. The outdoor temperature and/or humidity can be displayed on the console or touchscreen, or spoken over the telephone. Furthermore, the outdoor temperature can be displayed on an HAI communicating thermostat. Automation programs, macros, and indoor appliances can be controlled based on the outdoor temperature and/or humidity.
  • Sale price: $203.37

  • 1109 HAI Home Control for Windows Media Center
  • 1109 HAI Home Control for Windows Media Center

  • SKU: 1109
  • Product #: 57112
  • 1109 Home Control for Windows Media Center click image to enlarge HAI's
    award-winning Home Control for Windows Media Center is software for
    Windows Media Centers that allow you to control all of your HAI home
    control system's features from the comfort of an easy chair using a
    single Media Center remote.
  • Sale price: $209.93

  • 1120 HAI Snap Link Monitor & Control From Any Remote PC
  • 1120 HAI Snap Link Monitor & Control From Any Remote PC

  • SKU: 1120
  • Product #: 57114
  • Snap-Link - Monitor & Control HAI Lumina or Omni Automation/Security Controllers From Any Remote PC. USB thumb drive inserts in any PC's USB port to connect to your home automation/security controller Encrypted software requires no installation or removal after use Adjust lighting, security, thermostat settings, and surveillance cameras remotely from any Internet-connected PC. If you use the Lumina or Lumina Pro to control your home's lighting or the Omni IIe or OmniPro II to control security and surveillance in addition to lighting, you can monitor and control your home's systems remotely across a network or over the Internet. HAI's Snap-Link software can be installed on any PC as a conventional application or it can run from the included thumb drive. Simply insert the Snap-Link into a remote computer with an Internet connection, and you'll be able to monitor and control lights, security, temperatures, and IP cameras at your home.
  • Sale price: $209.93

  • 363143-01 ALC Dimmer Switch, 600 W, Dimpled Paddle, White
  • 363143-01 ALC Dimmer Switch, 600 W, Dimpled Paddle, White

  • SKU: 363143-01
  • Product #: 57157
  • Versatile dimming control of incandescent and magnetic low voltage lighting. Provides soft-on filament saver feature, full on, off, on-to-preset level, ramp-to-desired-level, ramp off. ALC 600W dimmers do not require derating in multi-gang dimmer installations.
  • Sale price: $212.50

  • 363143-02 ALC Dimmer Switch, 600 W, Dimpled Paddle, Ivory
  • 363143-02 ALC Dimmer Switch, 600 W, Dimpled Paddle, Ivory

  • SKU: 363143-02
  • Product #: 57158
  • Versatile dimming control of incandescent and magnetic low voltage lighting. Provides soft-on filament saver feature, full on, off, on-to-preset level, ramp-to-desired-level, ramp off. ALC 600W dimmers do not require derating in multi-gang dimmer installations.
  • Sale price: $212.50

  • 363143-03 ALC Dimmer Switch, 600 W, Dimpled Paddle, Almond
  • 363143-03 ALC Dimmer Switch, 600 W, Dimpled Paddle, Almond

  • SKU: 363143-03
  • Product #: 57159
  • Versatile dimming control of incandescent and magnetic low voltage lighting. Provides soft-on filament saver feature, full on, off, on-to-preset level, ramp-to-desired-level, ramp off. ALC 600W dimmers do not require derating in multi-gang dimmer installations.
  • Sale price: $212.50

  • 10A11-1 HAI Two-Way Audio/Voice Alarm Module
  • 10A11-1 HAI Two-Way Audio/Voice Alarm Module

  • SKU: 10A11-1
  • Product #: 57106
  • The Model 10A11-1 Two-Way Audio/Voice Alarm Module allows two-way communication with a central station after an alarm, paging and listening from an on-premises or remote phone, annunciation of alarm and zone by voice, and voice messaging (not available on all systems). After an audible alarm, the module allows the central station to control the listen/talk mode. After a silent alarm, the module allows listen in only. Use with HAI Part Number 33A00-4 Omni Console with Built-In Speaker/Microphone, 33A00-20 Lumina Keypad with Built-In Speaker/Microphone, 28A00-1 Surface Speaker Microphone, or 28A00-2 Flush Speaker Microphone. The Model 10A11-1 may be used with Lumina, Lumina Pro, Omni LT, Omni, Omni II, Omni IIe, OmniPro and OmniPro II home control systems.
  • Sale price: $213.20

  • 363143-12 ALC Dimmer Switch, 600 W, Smooth Paddle, Ivory
  • 363143-12 ALC Dimmer Switch, 600 W, Smooth Paddle, Ivory

  • SKU: 363143-12
  • Product #: 57162
  • Connects directly to ALC relay and Dimmer switches as a slave to provide multi-way local on/off and dimming control. Does not connect directly to the 120VAC load or system controller.
  • Sale price: $214.64

  • 364355-01 ALC 4-Button Scene Switch, White
  • 364355-01 ALC 4-Button Scene Switch, White

  • SKU: 364355-01
  • Product #: 57177
  • Connects to a controller to provide program control of lights, lighting scenes, house modes or devices such as motorized blinds, fans, garage doors, etc. Does not directly control a 120VAC load.
  • Sale price: $217.68

  • 363142-13 ALC Relay Switch 15A, Smooth Paddle, Almond
  • 363142-13 ALC Relay Switch 15A, Smooth Paddle, Almond

  • SKU: 363142-13
  • Product #: 57154
  • On/off control of any 120VAC load up to 15A including lighting, fans and outlet circuits.
  • Sale price: $218.87

Worldeyecam Logo
call us today 1-888-211-2288
Call for Free System Design
Get the Right Equipment
1st and Save Thousands

FREE UPS Shipping On Orders Above $500