Camera, Kits

  • RPPJM Dome accessory, kit for adapting older series SpeedDome to current J-box
  • RPPJM Dome accessory, kit for adapting older series SpeedDome to current J-box

  • Product #: 47566
  • RPPJM Dome accessory, kit for adapting older series SpeedDome to current J-box

    The American Dynamics RPPJM SpeedDome to Current J-Box Adapter lets you install an old SpeedDome series to current J-Box.

    • Adapts old SpeedDomes to current J-Box
    • RPPJ-M Dome accessory, kit for adapting older series SpeedDome to current J-box - American Dynamics
  • Sale price: $59.97

  • EH1512-2BKIT EH1512 BLWR KIT,24V CAM PSU,24V
  • EH1512-2BKIT EH1512 BLWR KIT,24V CAM PSU,24V

  • Product #: 47800
  • EH1512-2BKIT EH1512 BLWR KIT,24V CAM PSU,24V

    The Pelco EH1512-2BKIT Blower Kit (24 VAC) includes a continuous-duty 24 VAC blower (defroster) that offers 1 cfm of air movement and is suitable for use with the EH1512 Series Enclosures.

    Features:
    • Pre-Packaged Enclosure, Camera, and Lens
    • Easy to Order
    • Indoor and Outdoor Environmental Models Available
    • Use IP or Analog 1/3” cameras and lenses
    • Small, Sleek, Contemporary Design
    • High Reliability Die-Cast Construction
    • Tethered Lid
    • Tamper-Proof Hardware
    • Cable Entry Glands and Mounting Holes on Bottom of Enclosure
    • Designed for Indoor/Outdoor Applications
    • Meets IP66 and NEMA Type 4X Standards
    • Easy Access for Servicing and Installation
    • Models Available with Factory-Installed Low Power Heater and Blower with 24 VAC Camera Power Supply
    • Models with Feedthrough Mount Available
    • 3-Year Warranty

  • Sale price: $79.70

  • VI0020 ViewMate IP Camera and POE Installation Tool
  • VI0020 ViewMate IP Camera and POE Installation Tool

  • Product #: 48002
  • VI0020 ViewMate IP Camera and POE Installation Tool

    Vigitron’s ViewMate is a compact but powerful tool for installing and troubleshooting POE enabled IP cameras. When connected, ViewMate passes the POE power from the “POE In” Ethernet port to the remote POE device, and the “Monitor” port provides direct network connection from the remote POE camera to a local laptop for focusing and setting up POE enabled IP cameras.

    ViewMate’s integrated 2-digit LED voltmeter provides an accurate measurement of the actual POE voltage delivered to the IP camera. It is compatible with IEEE 802.af, IEEE 802.at and most non-standards POE systems up to 30 watts for 100/10 BASE-T environments.

    ViewMate’s patent-pending design offers a small and rugged packaging with a buit-in 3-foot Cat 5 cable. It is an ideal diagnostic tool for all installers working with both CCTV and IT POE systems.

    Features:
    • Provides an easy way to setup and focus POE powered IP cameras
    • Keeps flow of POE power to the IP camera while making a local Ethernet connection to a laptop to view the camera image
    • Accurately measures and displays the POE voltage at the POE IP camera
    • 10BASE-T and 100BASE-T compliant with integrated crossover Ethernet port
    • Compatible with IEEE 802.af, IEEE 802.at and most non-standard POE solutions up to 30W
    • Does not require external power source, uses POE power from the network
    • Low cost and easy to use
    • Speeds up the IP camera installation
    • Limited lifetime warranty

  • Sale price: $93.77

  • VI0021 ViewMate IP Camera and POE Installation Tool
  • VI0021 ViewMate IP Camera and POE Installation Tool

  • Product #: 73350
  • VI0020 ViewMate IP Camera and POE Installation Tool

    Vigitron’s ViewMate is a compact but powerful tool for installing and troubleshooting POE enabled IP cameras. When connected, ViewMate passes the POE power from the “POE In” Ethernet port to the remote POE device, and the “Monitor” port provides direct network connection from the remote POE camera to a local laptop for focusing and setting up POE enabled IP cameras.

    ViewMate’s integrated 2-digit LED voltmeter provides an accurate measurement of the actual POE voltage delivered to the IP camera. It is compatible with IEEE 802.af, IEEE 802.at and most non-standards POE systems up to 30 watts for 100/10 BASE-T environments.

    ViewMate’s patent-pending design offers a small and rugged packaging with a buit-in 3-foot Cat 5 cable. It is an ideal diagnostic tool for all installers working with both CCTV and IT POE systems.

    Features:
    • Provides an easy way to setup and focus POE powered IP cameras
    • Keeps flow of POE power to the IP camera while making a local Ethernet connection to a laptop to view the camera image
    • Accurately measures and displays the POE voltage at the POE IP camera
    • 10BASE-T and 100BASE-T compliant with integrated crossover Ethernet port
    • Compatible with IEEE 802.af, IEEE 802.at and most non-standard POE solutions up to 30W
    • Does not require external power source, uses POE power from the network
    • Low cost and easy to use
    • Speeds up the IP camera installation
    • Limited lifetime warranty

  • Sale price: $93.77

  • DFM3 Dome Flush Mount Kit
  • DFM3 Dome Flush Mount Kit

  • Product #: 47980
  • DFM3 Dome Flush Mount Kit

    The DFM3 is a flush dome mount kit manufactured by Speco for use with dome cameras. The DFM3 mount kit has been specially preconfigured to fit numerous types of Speco indoor and tamper-proof dome cameras; it also features a paintable ring which allows for easy matching with the surrounding areas. The DFM3 flush mount kit can be easily installed into hollow walls or ceilings, and is secured with 4 x EZ mount retaining clamps. This flush dome mount kit is affordable, and comes complete with 2 sizes of Chameleon™ snap-on decorator rings for a finished appearance.

    Features:
    • Back box easily flush mounts into hollow walls and ceilings
    • Flush mount box is secured with the use of four EZ mount retaining clamps
    • Perfect for existing construction
    • Preconfigured to fit several types of Speco tamperproof and indoor dome cameras
    • Contains two different sizes of snap-on Chameleon™ decorator rings for a more finished look
    • Rings can be painted to match any décor before installation
    • Built-in loop allows the installer to secure the DFM2 with a safety strap
    • Back box, 2 trim rings and cut-out template included
  • Sale price: $96.76

  • IS20-FK CAMCL 2 IS2X INDOOR FLUSH KIT
  • IS20-FK CAMCL 2 IS2X INDOOR FLUSH KIT

  • Product #: 47942
  • IS20-FK CAMCL 2 IS2X INDOOR FLUSH KIT

    The Camclosure(tm) 2 Series mounts offer versatile alternative mounting options for Pelco's Camclosure 2 Series camera systems when a surface or flush (in-ceiling) installation location is not available. These economical mounts are designed specifically for the Camclosure 2 Series, ensuring ease of installation and cohesion in the look of the Camclosure 2 lineup.

    • Adapts IS20-CH and IS20-DN Series surface mount cameras for flush (in-ceiling) applications
    • Indoor use
    • Durable construction
    • Easy to install
    • Color matched trim ring included
  • Sale price: $152.37

  • IS20DWS-FK CAMCL 2 IS2X INDR DWS FLSH KIT
  • IS20DWS-FK CAMCL 2 IS2X INDR DWS FLSH KIT

  • Product #: 47937
  • IS20DWS-FK CAMCL 2 IS2X INDR DWS FLSH KIT

    Camclosure 2 IS2X Model DWS Camera Flush Mount Kit

    The Camclosure(tm) 2 Series mounts offer versatile alternative mounting options for Pelco's Camclosure 2 Series camera systems when a surface or flush (in-ceiling) installation location is not available. These economical mounts are designed specifically for the Camclosure 2 Series, ensuring ease of installation and cohesion in the look of the Camclosure 2 lineup.

    • Adapts IS20-DWS Series surface mount cameras for flush (in-ceiling) application
    • Durable construction
    • Indoor use
    • Easy to install
    • Color-matched trim ring include
  • Sale price: $152.37

  • MINILL Replacement bulb kit MF100
  • MINILL Replacement bulb kit MF100

  • Product #: 47629
  • MINILL Replacement bulb kit MF100

    The MINILL from BOSCH is a replacement bulb kit MF100.

    The Bosch MINILL Replacement Bulb Kit for MF100 Miniflood Illuminator has high efficiency quartz halogen bulbs that generate short to mid-range infrared illumination. Ideal for covert and semi-covert night-time surveillance at places where normal lighting is unsuitable or very expensive, the bulb kit has 8000 hour long life.

    Features:
    • For use with the MF100 Miniflood Illuminator
    • Quartz halogen bulbs generate short to mid-range infrared illumination
    • Ideal for covert and semi-covert night-time surveillance
    • 8000 hour long life
  • Sale price: $193.20

  • IVSM5 AUDIO SUREVLLIANCE KIT
  • IVSM5 AUDIO SUREVLLIANCE KIT

  • Product #: 47697
  • IVSM5 AUDIO SUREVLLIANCE KIT

    Digital ID View IV-SM5 Audio Surveillance Kit

    SM1 Microphone Specifications
    • Omni-directional Electret element. 25' range in all directions
    • Low noise MOSFET pre-amplifier
    • Line level, unbalanced output
    • Adjustable gain
    • Treble boost circuit. Selectable on/off. Enhances clarity of time lapse recordings
    • Limiter circuit. Selectable on/off
    • Easy cable run termination
    • Flush or surface mountable. Can be mounted on a single gang electrical box

    SM2 Interface Adapter Specifications
    • Standard RCA jack for connection to tape recorders, etc
    • Easy cable run termination
    • LED power indicator
    • Reverse polarity protected and fused
    • Dimensions W 1.75 x L 2.75 x H 1.25

    Wiring Requirements
    • Stranded 22-gauge, 3-conductor shielded cable. Distances up to 1500'
  • Sale price: $196.81

  • 4119507 Pole adapter for F-Series wall mount
  • 4119507 Pole adapter for F-Series wall mount

  • Product #: 47706
  • 4119507 Pole adapter for F-Series wall mount

    The FLIR F-Series pole mount adapter (4119507) is supplied with stainless steel straps for fastening the adapters to poles. Stainless steel hardware also is provided for attaching mounts to the adapters. The pole mount adapter is constructed of aluminum and has a gray polyester powder coat finish.

  • Sale price: $203.37

  • CECEV48A CHUGAI CEC-EV48A B/W 1/3" W/IN
  • CECEV48A CHUGAI CEC-EV48A B/W 1/3" W/IN

  • Product #: 47680
  • CECEV48A CHUGAI CEC-EV48A B/W 1/3" W/IN

    1/3" B&W w/integrated 4-8mm A/I lens

    Features:
    • 380 TV Lines of Resolution
    • Compact Design For Discrete Indoor Applications
    • 4-8mm Auto-Iris Varifocal Lens
    • Wall or Ceiling Mount With Built-In Mounting Bracket
  • Sale price: $213.20

  • LCHE49A CHUGAI 1/4" B&W HiRES W/INTEGR
  • LCHE49A CHUGAI 1/4" B&W HiRES W/INTEGR

  • Product #: 47690
  • LCHE49A CHUGAI 1/4" B&W HiRES W/INTEGR

    LCH-E49A High Resolution B&W with Auto Iris

    • Available in B/W or Color models with standard
    • or high resolution CCD
    • Integrated computar® varifocal lenses
    • provide a wide variety of adjustment ranges:
    • 2-4mm (105°-53° HFOV) wide, f1.4
    • 3-6mm (72°-36° HFOV) standard, f1.2
    • 4-9mm (52°-24° HFOV) telephoto, f1.6*
    • Fixed or Auto Iris lens options allow for indoor
    • or outdoor use (with proper outdoor housing)
    • Auto-sensing dual voltage power input
    • (12VDC or 24VAC)
    • DSP controls for backlight compensation,
    • white balance, gain control and more
    • Optional mounting bracket (CMB-4)
  • Sale price: $278.81

  • YCB-08-KIT1 600TVL Box Camera, Bracket and 2.9-8.2mm Lens
  • YCB-08-KIT1 600TVL Box Camera, Bracket and 2.9-8.2mm Lens

  • Product #: 82289
  • Features
    • 600 TVL Resolution
    • 2.9-8.2mm Auto-Iris Varifocal Lens
    • Digital Day/Night
    • Digital WDR (Wide Dynamic Range)
    • Backlight Compensation
    • Motion Detection
    • Privacy Masking
    • 2D Digital Noise Reduction
    • Multi-function switch for OSD control
    • Wall / Ceiling Mount Bracket Included
  • Sale price: $280.00

  • MNTPOL Pole mount kit for ENC-OUTD/ENC-OUTD15
  • MNTPOL Pole mount kit for ENC-OUTD/ENC-OUTD15

  • Product #: 47973
  • MNTPOL Pole mount kit for ENC-OUTD/ENC-OUTD15

    Stardot Technologies MNT-POL Heavy Duty Pole Mount Kit for ENC-OUTD (for use with Heavy Duty Enclosure # ENC-OUTD only)

    Banding clamp kit is included, bracket is strapped to pole. The mount allows the enclosure to be manually panned and tilted into position. Lock position by tightening pan/tilt bolts.

    Compatible with the StartDot Heavy Duty enclosures.

    Features:
    • Bracket Dimensions: 12" (305 mm) Long with an 8" (203 mm) high pole mount section
  • Sale price: $295.23

  • 1000RFKITA INSTALLER KIT
  • 1000RFKITA INSTALLER KIT

  • Product #: 47695
  • 1000RFKITA INSTALLER KIT

    Channel Vision's RF Connector Kit A is a complete connector kit that is ideal for any home or business.

    Kit Includes:
    • 4 each: 2-Way Splitter/Combiner 1GHz (HS-2)
    • 3 each: 3-Way Splitter/Combiner 1GHz (HS-3)
    • 4 each: 4-Way Splitter/Combiner 1GHz (HS-4)
    • 5 each: F-Female/BNC-Male Connector (2105)
    • 5 each: F-Female to RCA Male Connector (2126)
    • 5 each: 3dB Attenuator (3000-3)
    • 5 each: 6dB Attenuator (3000-6)
    • 5 each: 10db Attenuator (3000-10)
    • 2 each: 20 dB Attenuator (3000-20)
    • 25 each: F-Male terminator (2101)
    • 50 each: Push and Seal for RG6 in Black (2133)
    • 25 each: Push and Seal for RG6 Quad in Blue (2134)
  • Sale price: $304.26

  • ENC5400-2PORT 2 PORT HOST CARD KIT
  • ENC5400-2PORT 2 PORT HOST CARD KIT

  • Product #: 47802
  • ENC5400-2PORT 2 PORT HOST CARD KIT

    The ENC5400-2PORT from Pelco is a 2 port host card.
  • Sale price: $316.49

  • SMR11DYGZU Add Dual IR Illuminators Bracket to Esprit with IOP
  • SMR11DYGZU Add Dual IR Illuminators Bracket to Esprit with IOP

  • Product #: 47969
  • SMR11DYGZU Add Dual IR Illuminators Bracket to Esprit with IOP

    "Add Dual IR Illuminators Bracket to Esprit with IOP. Internal feedthrough for 360 rotational Design for simple field installation of selected IR ILUMINAR SERIES IR229"
  • Sale price: $334.90

  • WVCP290 1/3" CCD COLOR AND B/W BOX CAMERA 540TVL
  • WVCP290 1/3" CCD COLOR AND B/W BOX CAMERA 540TVL

  • Product #: 47769
  • WVCP290 1/3" CCD COLOR AND B/W BOX CAMERA 540TVL

    1/3" CCD, Color Camera with Day/Night Function

    Features:
    • ABS (Adaptive Black Stretch) enhances visibility of dark areas without degrading image quality in bright areas.
    • High sensitivity: 0.6 lux (Color), 0.04 lux (B/W) at F1.2
    • High resolution: 540 TV lines (Color)
  • Sale price: $360.80

  • WVCP294 1/3" CCD COLOR AND B/W BOX CAMERA 540TVL, .6LUX COLOR .04 LUX B/W, ABS 24VAC
  • WVCP294 1/3" CCD COLOR AND B/W BOX CAMERA 540TVL, .6LUX COLOR .04 LUX B/W, ABS 24VAC

  • Product #: 47770
  • WVCP294 1/3" CCD COLOR AND B/W BOX CAMERA 540TVL, .6LUX COLOR .04 LUX B/W, ABS 24VAC

    1/3" CCD, Color Camera with Day/Night Function

    Features
    • ABS (Adaptive Black Stretch) enhances visibility of dark areas without degrading image quality in bright areas.
    • High sensitivity: 0.6 lux (Color), 0.04 lux (B/W) at F1.2
    • IR cut filter switches on/off to enhance the sensitivity in B/W mode.
    • High resolution: 540 TV lines (Color)
  • Sale price: $360.80

  • EVTAB1Q Active video balun set. Includes one EVT-TB1-42TQ transmitter and one EVT-RB1-4T2Q receiver
  • EVTAB1Q Active video balun set. Includes one EVT-TB1-42TQ transmitter and one EVT-RB1-4T2Q receiver

  • Product #: 47974
  • EVTAB1Q Active video balun set. Includes one EVT-TB1-42TQ transmitter and one EVT-RB1-4T2Q receiver

    The fast, easy, and low-cost way to connect a CCTV camera to a monitor, multiplexer, or video recorder. These amplified video baluns allow the video signal of a single CCTV camera to be transmitted long distances over low-cost Cat5e/6 unshielded twisted pair (UTP) cable. They are great for both full-motion color and full-motion monochrome cameras, and increase the flexibility of where such cameras can be mounted. These CCTV baluns also work over existing UTP cabling, making them perfect for use in nearly any building or across an entire campus.

    Features:
    • Active operation -- The transmitter amplifies the video signal for excellent picture quality at long distances.
    • Transmits video signal up to 1.5mi (2.4km).
    • Uses low-cost Cat5e/6 unshielded twisted pair cable instead of costly coaxial cables.
    • Includes BNC connectors and removable terminal blocks -- No need to waste time crimping RJ-45 connectors.
    • High immunity from interference -- Built-in impedance coupled device and noise filter.
    • Easy installation.
    • 300mA DC output on transmitter.
    • Includes 12VDC power adapters.
    • Gold-plated BNC connectors.
    • Surge protection. Ground lifting and transient protection.
    • Patent pending interlocking design allows multiple units to be blocked together
  • Sale price: $365.07

Worldeyecam Logo
call us today 1-888-211-2288
Call for Free System Design
Get the Right Equipment
1st and Save Thousands

FREE UPS Shipping On Orders Above $500