Nitek

  • NITEK CJX3 RJ59 PATCH CORD 30'
  • NITEK CJX3 RJ59 PATCH CORD 30'

  • Product #: 48465
  • NITEK CJX3 RJ59 PATCH CORD 30'

    The Nitek CJX3 is a simple RG59 cctv cable with a black coloring. This simple patch cord is only 3ft in length. So if you have a small segment run in need of RG59 cctv cabling; then the Nitek CJX3 is perfect for you.

    Furthermore if you are looking for larger RG59 coax cable length; feel free to give us a call and we will work to find you the best cctv cable length possible for your surveillance applications.

    Features:
    • RG59 Coaxial Cable Patch Cord
    • 3ft In Length
    • Black In Color
  • Sale price: $10.19

  • IP1054 Single Port PoE Plus Power Inserter-Injector
  • IP1054 Single Port PoE Plus Power Inserter-Injector

  • Product #: 66083
  • The IP1054 PoE Plus Inserter, single port power over Ethernet inserter is another addition to the industrial networking solutions offered by Nitek. The IP1054 PoE Injector accepts data transmission from the network, while connecting to the IP device transmitting power over Ethernet and network data. The IP1054 PoE Inserter-Injector works by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8 (V-) and supports the IEEE802.3at specifications of 100 meters, 54VDC @ 800mA. The IP1054 has a variable input auto switching power supply which allows for input voltage ranging from 100240V 50/60Hz. The IP1054 has various levels of protection from surges, short circuits and overloads which makes the IP1054 a reliable choice even in the toughest of conditions.
  • Sale price: $133.28

  • CAMIP1 IP Camera, Network Devices and PoE Device Surge Protector
  • CAMIP1 IP Camera, Network Devices and PoE Device Surge Protector

  • Product #: 57554
  • The CAMIP1 is a single channel, in-line, network video, multi-stage
    surge protector for IP camera or PoE network devices. The CAMIP1 is
    designed to provide surge protection for one network port. The unit has
    RJ45 jack connectors at the input and output for connection to the
    network cable and is ideally suited for small or restricted spaces where
    the network needs to be protected. The CAMIP1 provides a heavy, single
    point ground connection and is easy to install in minutes.
  • Sale price: $184.17

  • CAMPDD24 Camera Video, PTZ, and 12/24 Volt Power Surge Protector
  • CAMPDD24 Camera Video, PTZ, and 12/24 Volt Power Surge Protector

  • Product #: 74221
  • Features:
    • Unique multi-stage design
    • Insertion loss < 0.2 dB
    • 2.8V clamping voltage
    • Multi-function - protects video, & camera power inputs
    • Heavy single point ground
    • Easy to install
  • Sale price: $200.94

  • CAMTRV24 Passive Video Balun and Multi Function Surge Protector
  • CAMTRV24 Passive Video Balun and Multi Function Surge Protector

  • Product #: 57555
  • The CAMTRV24 is a single channel video balun transceiver used for UTP
    video transmission combined with a multi-function surge protector for
    in-line video, 2 wire P/T/Z control and the camera supply voltage. The
    CAMTRV24 provides multi-stage surge protection to a single camera system
    and P/T/Z unit for each of these functions. The video balun transceiver
    is a video transmission device that provides a low cost means of
    sending live video over unshielded twisted pair, point-to-point wiring
    for distances of up to 750 feet (225 meters). A basic system uses (2)
    CAMTRV24 units, one at each end of a twisted pair of wires. These units
    are intended for use over existing in-house telephone wiring, or
    category cabling or other twisted pair cable runs to provide a
    convenient, cost-effective alternative to coax. The CAMTRV24's are
    designed to provide superior immunity from noise and interference even
    when running next to line power! The unit can be used at the camera or
    head-end. The CAMTRV24 is ideally suited for outdoor cameras, where
    extreme protection on all signal connections is required. The unit is
    equipped with a BNC connector and screw terminals for the video
    connections and screw terminal inputs and outputs for connection to the
    P/T/Z data and 12/24 VAC/DC voltage connections. The CAMTRV24 provides a
    heavy, single point ground connection and is easily installed in
    minutes.
  • Sale price: $277.97

  • EE328 Ethernet & PoE Extender
  • EE328 Ethernet & PoE Extender

  • Product #: 66264
  • The EE328 is a single unit IP Network and PoE Repeater that requires very little installation time and absolutely no set up or configuration. Installation requires simply connecting the unit in line with the network run. Each unit extends the cable run by 100 meters or 328 feet. The EE328 ethernet repeater draws power from the POE network switch and extends the power for the next 100 meters. If the network switch is not a POE device the EE328 has an optional power input and can also function as a POE inserter in addition to extending the network communication signals. The EE328 is fully 802.3af compliant as a POE source and device. It is idea for extending network signals or networks and POE signals.

    LED lights easily tell the status of network communication and POE power. The EE328 requires no network setting to be changed or adjusted.

    The EE328 extends and repeats network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.

    The units are constructed of industrial grade RoHS compliant plated aluminum which is finished with corrosion resistant finish making it very durable.
  • Sale price: $488.71

  • IPPTR12 IP Network 12 Port Surge Protector
  • IPPTR12 IP Network 12 Port Surge Protector

  • Product #: 74222
  • Features:
    • Provides 12 channels of surge protection
    • Works with PoE and non-PoE 10/100 equipment
    • Fits standard 19" rack cabinets
    • Easy to install
  • Sale price: $586.06

  • EE328W Outdoor Network Repeater Unit
  • EE328W Outdoor Network Repeater Unit

  • Product #: 66465
  • The EE328W is a single unit IP Network and PoE Repeater that requires very little installation time and absolutely no set up or configuration. The EE328W includes a NEMA4X rated enclosure to house the Ethernet Repeater. The weatherproof enclosure makes it possible to take the network outdoors for operation in hostile environments. Installation requires simply connecting the unit in line with the network run. Each unit extends the cable run by 100 meters or 328 feet. The EE328W ethernet repeater draws power from the POE network switch and extends the power for the next 100 meters. If the network switch is not a POE device the EE328W has an optional power input and can also function as a POE inserter in addition to extending the network communication signals. The EE328W is fully 802.3af compliant as a POE source and device. It is ideal for extending network signals or networks and POE signals.
  • Sale price: $652.68

  • EL1500C IP Cameras Over Coax Extender
  • EL1500C IP Cameras Over Coax Extender

  • Product #: 69025
  • Features :
    • Transmits up to distances of 500 meters ⁄ 1,640 feet
    • Supports PoE and network communications
    • Supports any network device, including IP cameras
    • Fully transparent to the network
    • Built-in surge protection
    • Easy to install, no set up required
    • No MAC or IP addressing required
    • LED indicators for network signals, link status and power
    • Optional power supply can insert POE power for non-POE switches
  • Sale price: $1,336.23

  • IP1648 16 Port Midspan, Rack Mount, POE Injector
  • IP1648 16 Port Midspan, Rack Mount, POE Injector

  • Product #: 66085
  • The IP1648 PoE Inserter provides mid-span power for PoE compliant devices. The IP1648 PoE injector is available as a sixteen port device in a space saving 1U EIA 19" rack mount chassis which may be rack or shelf mounted. IP cameras or other network devices may be located up to 100m (328 ft.) from the IP1648. Nitek's EE328 repeater module can be utilized to extend the distance an additional 100m (328 ft.). The IP1648 Multi-Channel PoE Inserter is designed to provide up to 15.4 watts of power per output. Each output is individually fused. The IP1648 installs in minutes and provides an economical means of service and installation of PoE devices.
  • Sale price: $1,369.73

  • EL1500U IP Video Network Extender
  • EL1500U IP Video Network Extender

  • Product #: 69030
  • Features :
    • Transmits up to distances of 600 meters (2000 feet)
    • Supports mega-pixel technology
    • Fully transparent to the network
    • Supports any network device, including IP cameras
    • Supports 10/100 and PoE
    • Easy to install, no set up required
    • No MAC or IP addressing required
    • LED indicators for network signals, link status and power
    • Optional power supply can insert PoE power for non-PoE switches
    • Surge protected inputs
    • Ground loop isolation
  • Sale price: $1,503.67

  • VR124COAX TCP 4/IP TRANSMISSION OVER COAX UP TO 2500 FT PAIR OF 2
  • VR124COAX TCP 4/IP TRANSMISSION OVER COAX UP TO 2500 FT PAIR OF 2

  • Product #: 57559
  • The VR124COAX to send IP Cameras over coax allows IP Ethernet transmission of network data to communicate over an existing coaxial cable for distances up to 2,500 feet (750 meters).

    The VR124COAX IP Camera Network Extender over coaxial cable, consists of a transmitter and receiver set which requires very little installation time and absolutely no set up or configuration. Installation requires simply connecting the BNC connectors at each end of the existing coaxial cable to the transmitter and receiver of the VR124COAX. Once powered up the transmitter and receiver instantly connect and begin operating as a full-duplex 100BaseT Ethernet conduit. The VR124COAX IP Video Network Extender is completely transparent to the network; it has no IP or MAC addresses and does not require any additional setup or programming. Connect your network devices by plugging their RJ45 connectors into the network port of the transmitter and receiver. LEDs on the devices indicate the presence of power, transmission link and network signals for easy troubleshooting.

    The VR124COAX IP Camera Ethernet Extender over Coax operates to extend IP cameras and network devices, overcoming cable distance limitations and offering connections to devices in locations traditional networking does not allow. The VR124COAX IP network extender will auto-negotiate bandwidth to compensate for wire attenuation and losses that occur from wire length, signal noise and interference. (Please refer to cable distance and bandwidth charts for further review).

    The units are constructed of industrial grade RoHS compliant plated steel which is finished with a heat resistant powder coat paint making them very durable. They are designed to mount within the camera housing, in an equipment enclosure or simply wall mount the unit using the included mounting kit. For installation of several units the RK124 rack mount kit allows for centralized power of the receiver units while maintaining an orderly installation.
  • Sale price: $1,507.01

  • VR124UTP TCP 4/IP TRANS. OVER UTP UP TO 1 MILE PAIR OF 2
  • VR124UTP TCP 4/IP TRANS. OVER UTP UP TO 1 MILE PAIR OF 2

  • Product #: 57562
  • The VR124UTP allows IP Ethernet transmission of network data to communicate over a single pair of UTP cable for distances up to 1 mile (1,600 meters).

    The VR124UTP Long Range IP Network Extender consists of a transmitter and receiver set which requires very little installation time and absolutely no set up or configuration. Installation requires simply connecting the wire pairs at each end of the existing UTP cable to the transmitter and receiver of the VR124UTP. Once powered up the transmitter and receiver instantly connect and begin operating as a full-duplex 100BaseT Ethernet conduit. The VR124UTP IP camera ethernet extender is completely transparent to the network; it has no IP or MAC addresses and does not require any additional setup or programming. Connect your network devices by plugging their RJ45 connectors into the network port of the transmitter and receiver. LEDs on the devices indicate the presence of power, transmission link and network signals for easy troubleshooting.

    The VR124UTP IP Network Extender extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The VR124UTP Network Extender will auto-negotiate bandwidth to compensate for wire attenuation and losses that occur from wire length, signal noise and interference. (Please refer to cable distance and bandwidth charts for further review).

    The units are constructed of industrial grade RoHS compliant plated steel which is finished with a heat resistant powder coat paint making them very durable. They are designed to mount within the camera housing, in an equipment enclosure or simply wall mount the unit using the included mounting kit. For installation of several units the RK124 rack mount kit allows for centralized power of the receiver units while maintaining an orderly installation.
  • Sale price: $1,671.11

  • VR148UTP IP Video Network Extender with PoE Injector
  • VR148UTP IP Video Network Extender with PoE Injector

  • Product #: 68485
  • Features :
    • Transmits high speed Ethernet over legacy UTP or Phone cable
    • Transmits distances up to 1 Mile (1,600 meters)
    • Transmitter converts 24vac to PoE for network devices
    • Supports mega-pixel cameras
    • Supports multi-camera installations
    • Fully tranparent to the network
    • Supports any network device, including IP cameras
    • Dual stage surge protection
    • Easy to install, no set up required
    • No MAC or IP addressing required
    • LED indicators for network signals, link status and power
    • Rack-mount kit available head-end
  • Sale price: $1,808.43

  • FSR1000 FIBER SUN RACK
  • FSR1000 FIBER SUN RACK

  • Product #: 44142
  • Nitek’s FSR1000 is a fiber equipment sub rack which can be configured to support any combination of Nitek fiber transmitters or receivers from anyone of the four series available. The FSR1000’s hot swappable design makes installation, system changes and serviceability quick and easy. When fully populated the FSR1000 houses up to 10 rack mounted fiber cards.

    Features:
    • 19” sub frame rack mount.
    • Hot swappable ‘plug and play’ design.
    • Supports up to 10 fiber cards.
    • Internal main power bus to all plug in cards
    • 100W DC Power supply included.
    • Detachable AC line cord.
    • Front panel status indicators.
    • Modular rack mount card provides flexible system design.
  • Sale price: $1,820.33

  • FRS1000 10 slot fiber equipment rack w/ power supply
  • FRS1000 10 slot fiber equipment rack w/ power supply

  • Product #: 44136
  • The FRS1000 fiber equipment sub rack can be configured to support any combination of Nitek fiber transmitters or receivers from any one of the four series available. A wide variety of modular cards allow the rack system (modular cards are sold separately).

    In addition to providing system customization, hot swappable “plug-in” feature of the modular card cage also provides easy future expansion and serviceability. The FRS1000 fiber equipment sub rack is a powered cabinet that holds up to 10 plug-in modules in any combination.

    Features:
    • 19" sub frame rack mount.
    • Hot swappable ‘plug and play’ design.
    • Supports up to 10 fiber cards.
    • Internal main power bus to all plug in cards
    • 100W DC Power supply included.
    • Detachable AC line cord.
    • Front panel status indicators.
    • Modular rack mount card provides flexible system design.
  • Sale price: $1,858.66

  • PVR164 16 Channel Head End Receiver with Power & Data Inserter Unit
  • PVR164 16 Channel Head End Receiver with Power & Data Inserter Unit

  • Product #: 65047
  • The new Nitek PVR164 is a head-end distribution system for video, power and data for control. The system provides these functions for 16 cameras. The unit can be rack mounted at the head-end location. The PVR164, a component of the UTPLinks structured cabling system, is a self-contained video, power and data distribution unit that uses the RJ45 jacks to combine video, power and data over a four pair category cable to each camera location. The PVR164 unit allows for a seamless transition from a traditional coaxial installation to a future-proof UTP cabling infrastructure. The system is designed to easily integrate with other Nitek UTP video equipment.
  • Sale price: $2,009.37

  • VR448COAX 4 Port PoE Switch with Network Extender
  • VR448COAX 4 Port PoE Switch with Network Extender

  • Product #: 68486
  • Features :
    • Transmits high speed Ethernet over legacy coaxial cable
    • Transmits distances up to 2500 feet (750 meters)
    • Integrated 4 port PoE unmanaged network switch
    • Provides PoE on demand for up to four devices
    • Supports mega-pixel cameras
    • Supports multi-camera installations
    • Fully transparent to the network
    • Supports any network device, including IP cameras
    • Dual stage surge protection
    • Easy to install, no set up required
    • No MAC or IP addressing required
    • LED indicators for network signals, link status and power
    • Rack-mount kit available head-end
  • Sale price: $2,340.92

WorldEyeCam Security Cameras Systems
call us today 1-888-211-2288
Security Camera Systems for Home, Business and Government

SEARCH our site for Cameras, DVRs, Systems, etc...